The following discounts apply to all these products.
Free International Shipping On Orders Over $250
Free Shipping On Orders Over $100
Takuma Replacement Masts
Each water area is now a limitless playground whatever your age or your riding level.
Missing a piece to your Takuma V100 Foil package? We may have it right here, just for you!
List Price: $199.00
Takuma Base Plate and Hardware
Mounting plate for Takuma V100 Foil
List Price: $199.00
M6 Stainless Steel T-nut Replacements Set of 4
These are Replacement M6 Stainless Steel T-nuts for the Takuma hydrofoil setup. Super low profile. These are hard to get replacements that we now have in stock.
FoilMount Standard Mounting Plate
The FoilMount is a universal hydrofoil mounting system, this means that you can put a hydrofoil track on just about any board you already have. Just stick and ride!
GoFoil Adapter Plate for 4-bolt System
Convert your GoFoil Deep Tuttle to a 4-bolt plate system with this adapter plate. Your GoFoil will tighten into this adapter and then can be used on ANY track mounted foilboard or FoilMount system.
FoilMount Ridge Mounting Plate
Previous1 of 2Next
The FoilMount is a universal hydrofoil mounting system, this means that you can put a hydrofoil track on just about any board you already have. Just stick and ride!
List Price: $169.99
M8 T-Nuts Stainless Steel Sets of 4
Previous1 of 3Next
These are low profile replacement M8 Stainless Steel T-nuts for the any hydrofoil that uses the M8 T-nut
GoFoil and Standard Deep Tuttle Adapter Plate for 4-bolt System
Previous1 of 4Next
This is a dual purpose adapter plate that will accommodate both the GoFoil Symmetrical deep tuttle and the standard Deep tuttle. The adapter includes "drop-in" fastening slots for easy in and out while working on any standard 90mm track system. The two tuttle retaining holes are slotted and large enough to fit M6 (GoFoil) or 1/4" (standard tuttle) bolts which will work on most systems.
Moses to Slingshot Mast Adapter
Previous1 of 4Next
Use any size Slingshot mast with your Moses setup. All Slingshot flight school masts 15", 24", 30", full length 35.4" kite mast, or 28" surf mast will work with this system.
Moses Front Wing
Previous1 of 7Next

Moses Rear Wing Stabilizer
Previous1 of 4Next

2018 Moses Fuselages
Previous1 of 3Next
Moses 647 or 680 Fuselage
Moses Mast
Previous1 of 5Next
Replacement Moses Mast for ANY Moses hydrofoil
Liquid Force Hydrofoil Replacement Mast Bolts
These are Stainless Metric M8x40mm Bolts with a #5 Allen Key head for mounting the Mast of the Foil Fish hydrofoil to the Mast Base Plate. Set of 2 bolts.
List Price: $10.00
Liquid Force Carbon Extended Fuselage
Liquid FOrce carbon hydrofoil fuselage
Liquid Force Slider Bolts for Hyrofoil Track
Brass T-nut inserts and countersunk bolts to mount Hydrofoils on the Happy pill Foil board and Rocket Foil board from Liquid Force.
Liquid Force Impulse Mast
patented extruded Designed for maximum torsional rigidity and longitudinal strength. This profile is optimized for superior efficiency and stability of ride.
2018 Naish Thrust Fuselage KS/Surf
Kite, Surf & SUP Fuselage for Naish thrust!
2018 Naish Thrust Kite Surf 1 Back Wing
Integrated Rudder Foil = Increased directional stability + better turning!
Thrust Base Plate
Easily convert any Thrust foil to work on any of Naish's foil kiteboards with the Thrust base plate!
List Price: $145.00
Half Straps 2.0
Sold in a set of two, Foot Hooks attach to your board?s standard foot strap mounts, with the opening of the hooks facing inward. Mounting can be adjusted based on the board?s insert options to accommodate for rider stance preferences. In addition to standard mounting (parallel with the board?s rails), the hooks also have angular options that allow them to be mounted at side angles.
List Price: $59.00
Hoverglide Hydrofoil Hardware Set
Hoverglide Hydrofoil Hardware Set
Slingshot Hoverglide Fuselage
Slingshot Hoverglide Hydrofoil Replacement Fuselage.
15 inch Flight School Hydrofoil Mast
Get a feel for riding the foil with the 15" Flight School Mast. This can be used with the Hoverglide hydrofoil as well as the Liquid Force Foil Fish by using the interface plate and extra base plate option.
Slingshot Hydrofoil Mast Base Plate
2016 Hoverglide Hydrofoil Mast Base Plate. This is an extra base plate for your hoverglide hydrofoil. If you get the flight school you will want one of these to make it easier to switch between your full length mast and your other length masts for shallow water or to teach your friends to foil.
List Price: $85.00
Slingshot set of 3 surf straps
Set of three Slingshot 2016 surf straps including the washers. These will work on ANY hydrofoil boards.
Slingshot H2 Hydrofoil Surf Wing
The H2 wing has a large surface area and provides lots of lift at slower speeds and in lighter wind. This results in a stable, user-friendly foil and an approachable entry into wake, windsurf and SUP foiling.
List Price: $549.00
Slingshot H4 Hydrofoil Surf Wing
One look at the H4 wing and it's easy to tell where it excels. With a low-aspect, high-surface area shape, it?s like a magic carpet that lets you glide across waves and swell you would have never thought possible until now.
List Price: $549.00
Slingshot Hoverglide Hardware Replacement
Previous1 of 2Next
A Stainless Steel alternative to the Titanium (expensive) hardware set. These all have large philips head or large #6 allen head drives so they are very hard to strip.
List Price: $44.00
Slingshot Switch Fuse Fuselage
Slingshot's Switch Fuse is an ingenious design that allows the foil to be configured in two different positions to accommodate varying board setups, rider preferences and skill levels.
Slingshot set of 2 surf straps

35.4 inch Flight School Hydrofoil Mast
Previous1 of 2Next
The Standard Full Length, Slingshot Hover Glide 35.4" Hydrofoil Mast. Great for big chop, and maximum upwind ability.
List Price: $109.99
Rear wing shim for the Hover Glide foil series
List Price: $66.00
LF Foil Fish Mounting Bolt Upgrade
Use ANY baseplate and hydrofoil with your Foil Fish Board using this system.
M8 Metric Kiteboarding Bolts
M8 Stainless Flat head bolts with a 1.25 thread pitch. These are the standard Metric bolts used on most hydrofoil boards. All have a large phillips head drive.
Interface Plate for Flight School and LF
Previous1 of 4Next
This is what you need if you're thinking about getting the Flight School short mast solution for your Liquid Force Hydrofoil. This interface plate and base plate will allow you to easily mate the Flight School system to your current Liquid Force Foil. "Will the Flight School System work on my Liquid Force Foil Fish Hydrofoil?" The answer is YES, with this system.
List Price: $100.00
Replacement Brass Hydrofoil Slider T-nuts
Previous1 of 4Next
Replacement Brass Slider T-nuts for all Liquid Force, Slingshot, and other Hydrofoil Board manufacturers. These are replacements so that you never miss a session on the water due to missing a few of these. Buy extra and keep in the hydrofoil kit.
List Price: $4.25
Motul Hydrofoil Cleaning Spray
Thanks to its exclusive silicone-based formula, Shine & Go Spray shines and revives the colors of plastic surfaces including carbon, resin, epoxy, surfboard finishes, and hydrofoil boards. Great for polishing and cleaning aluminum hydrofoil parts as well. The Non-stick protective film helps keep salt and sand from sticking to parts. It also makes all parts look awesome!
List Price: $25.99
Lift Foil Wing
Previous1 of 4Next
We are very proud to introduce our new one-piece wing designs that offer superior strength and performance. The wing serves as a critical component in the stability of the foil at any speed. For this reason we?ve tested and fine-tuned every detail: size, shape & angles- to specifically engineer wings that maximize control and stability without unnecessary drag.
Lift Foil Mast
Previous1 of 4Next
As one of the most crucial components of the foil, we have spent years refining our mast. Lean it over and push your hardest, our mast has excellent rigidity and strong construction to securely hold and keep you stable through the water.